Industry News

Isuzu fire truck is a special vehicle specially used for fire fighting and extinguishing. It usually has a bright red appearance and a scary sound to attract people's attention and convey the importance of the emergency. Isuzu fire trucks are equipped with various necessary fire-fighting equipment and rescue tools, such as fire water guns, water pumps, lifeline ropes, etc.To respond to different disaster scenes. It is also equipped with a large-capacity water tank or water pump to supply the water source needed to extinguish the fire. The Isuzu fire truck is specially designed to have good controllability and maneuverability. It can quickly reach the fire scene and remind other vehicles and pedestrians to avoid it through directional warning lights and sirens. The existence of fire trucks provides people with a kind of safety guarantee and protects people's lives and property. All in all, the Isuzu fire truck is an indispensable and important tool in the city. It symbolizes hope and rescue and provides our society with a powerful and reliable firefighting capability. 1. Centrifugal pump and water diversion device: (1) The water pump should be filled with lubricating oil once after running for 3-6 hours cumulatively, or if the fire is put out once. (2) Fire pumps are generally not allowed to idle, let alone at high speed. (3) After using seawater or other sewage, clean the pump and its piping system in time. (4) The water absorption height is generally limited to 7m to prevent cavitation. (5) After using the water pump, the water stored in the pump and pipelines should be drained in time to prevent corrosion and freeze cracking. Cover the inlet and outlet of the water pump with a pallet cover, and apply lubricating grease to the screw. (6) Regularly remove carbon deposits from the exhaust gas water diverter. (7) Antifreeze should be added to the water ring pump water tank in winter. Antifreeze is made from water and alcohol. (8) Regularly measure the maximum suction depth, water diversion time, and maximum water output of the centrifugal pump and water diversion device. If the performance indicators are not met, they should be repaired in time. 2. Fire extinguishing equipment and accessories: (1) Check whether the equipment accessories are complete, the position is fixed and reliable, always kept clean and dry, and the technical performance is good. (2) Regularly check whether the sealing rubber gaskets of suction pipes, hoses, water guns, and various fire-fighting equipment are complete. If there are any defects, they should be replaced in time. (3) After the additional cooler is used in severe cold seasons, the water in the inlet and return pipes should be pumped out in time using the exhaust water diversion device. 3. Isuzu fire truck chassis part: Its maintenance is carried out according to the original vehicle requirements. In addition, in order to adapt to the requirements of rapid dispatch, fire trucks must also: (1) The gara...

Isuzu sprinkler truck is a vehicle specially used for spraying water sources. It is usually used in environmental protection and urban management work such as road cleaning, irrigation, dust suppression, and construction site dust reduction.Common faults of Isuzu sprinkler trucks include the following: 1. Car chassis failure: including chassis wear, suspension system failure, braking system failure, etc. These faults may cause the vehicle to be unstable, have obvious bumps when encountering uneven roads, or cause the brakes to become insensitive. 2. Sprinkler system failure: including sprinkler pump failure, sprinkler pipe blockage, nozzle failure, etc. These faults may cause problems such as uneven watering, poor watering effect, or the sprinkler system not working properly. 3. Electrical system failure: including lighting failure, circuit short circuit, etc. These faults may cause the vehicle's lights to fail to work properly, affecting driving safety. 4. Hydraulic system failure: including hydraulic pump failure, hydraulic pipeline oil leakage, etc. These faults may cause the hydraulic system to fail to work and affect the realization of the sprinkler function. 5. Cooling system failure: including excessive water temperature, cooling water leakage, etc. These faults may cause the engine to overheat and affect the normal operation of the vehicle. 1. Motor part 1. No response after turning on the power. Most of them are caused by short circuits in the power plug, power leads and motor windings. 2. It is difficult to start or cannot start, and there is a "buzzing" sound. During maintenance, you can use small bamboo pieces to quickly move the fan blades in the direction of rotation. If the motor starts running quickly, it means that the starting capacitor or starting winding is damaged. You should replace the capacitor with the same capacity or repair the starting winding. If the motor is stuck, it is mostly the motor and pump head. Mechanical failure, such as bearing damage, impeller stuck, etc. 3. The motor can run, but the speed is slow, and the casing is overheated and has a burning smell. Most of them are caused by a short circuit in the motor windings. The motor should be disassembled and repaired by welding, jumper wires, isolation, rewinding and other measures depending on the damage. 4. There is loud noise and vibration during operation. Most of the time, the bearing is damaged or the bearing and the casing are not properly matched. The motor needs to be disassembled and inspected. If the bearing is damaged, it should be replaced; if the bearing is on the outer circle, the mating surface of the pump casing can be chiseled; if the bearing is on the inner circle, it can be The worn parts of the motor shaft are chiseled. If the wear is serious, repair it by first overlaying welding and then turning. 2. Sprinkler truck pump head part 1. The motor is running normally but the water output is small or no water at all. In this case, you should fi...

As one of the core equipment of Isuzu fire trucks, fire pumps play a key role in extracting and transporting water to the fire scene. The high-power fire pump equipped on Isuzu fire trucks has powerful water pumping and water delivery capabilities, and can quickly provide a large amount of fire-extinguishing water in different scenarios. The fire pump uses an efficient water pump system to draw water from a water tank or an external water supply source. While the vehicle is moving, it sprays a powerful water flow through fire hoses, sprinklers and other equipment to extinguish the fire. The existence of fire pumps greatly improves the fire extinguishing efficiency and combat capabilities of fire trucks, and can quickly respond to fires, curb the spread of fires, and protect people's lives and property safety. The stable operation and reliability of fire pumps provide continuous water supply for fire scenes and greatly improve the ability and mobility of fire fighters to respond to fires. Therefore, the fire pump is of irreplaceable importance to Isuzu fire trucks and is one of the key equipment to ensure the smooth progress of firefighting work. Let’s learn more about the fire water pump： For low-pressure water tank Isuzu fire trucks with parallel pumps, if low-pressure water supply is used, the usage method is the same as that of low-pressure water tank fire trucks. If medium-pressure water supply is used, when the pump is running at low speed, switch the series-parallel conversion handle from the "parallel" position at startup to the "series" position, and adjust the throttle so that the water pressure and flow rate meet the requirements of the water gun or the medium-pressure soft Requirements for pipe reels and medium pressure water guns. It should be noted that when converting between "parallel" and "series" on the series-parallel conversion handle, the pump speed must be reduced first, otherwise the forced conversion may damage the structural parts of the pump. For low-pressure water tank Isuzu fire trucks with tandem pumps, if only low-pressure water supply is used, the usage method is the same as that of low-pressure water tank fire trucks. If you only use medium-pressure water flow, you do not need to open the low-pressure water outlet. Instead, you only need to open the valve on the connecting pipe between the low-pressure pump and the medium-pressure pump, then open the valve on the medium-pressure outlet pipe or the medium-pressure hose reel valve, and adjust the throttle. , so that the water pressure and flow rate meet the requirements of the water gun or the requirements of the medium-pressure hose reel and medium-pressure water gun. If you want to use medium and low pressure together, open the low-pressure outlet valve, the valve on the connecting pipe between the low-pressure pump and the medium-pressure pump, the valve on the medium-pressure outlet pipe or the medium-pressure hose reel valve at the same time, adjust the throttle,...

The Isuzu sprinkler truck is equipped with a duckbill-shaped nozzle or a round-head nozzle in the front, a cylindrical sprinkler nozzle or a shower head nozzle in the back, and a working platform in the rear equipped with a water cannon. 8 nozzles can also be installed in the rear. Special functions of Isuzu sprinkler trucks and greening spraying trucks: multi-functional for greening and sanitation, suitable for greening and sanitation in urban residential factories, using high-power special sprinkler pumps with leading quality in the country. Front flush (spray) and rear sprinkler, with side spray (shower), with rear working platform, green sprinkler anti-aircraft gun installed on the platform (the gun can be adjusted for heavy rain, moderate rain, drizzle, and mist), with water suction pipe, and fire protection Joint, with self-flow valve, self-priming and self-discharging. Operating system: The engine mainly drives the gearbox. The power take-off installed on the gearbox drives the sprinkler pump. The sprinkler pump generates power to spray the liquid inside the tank through the pipe network. 1. Water absorption work (1) The sprinkler truck should be as close as possible to the operating point and park. (2) Open the side door of the walking platform box, take out the water-absorbing hose, and swing it backward without bending. (3). Pump the water-absorbing hose into the water as deep as possible, ensuring that the end of the pipe is always less than 300mm away from the liquid level during operation. (4). Push the handle of the four-way valve until it is perpendicular to the ground. (5). Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch backward to put the power take-off into gear, and the pump starts running. (6) The operator can pass the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified, and colleagues should quickly pull the water suction hose away from the water or close the four-way valve. (7) After putting away the hose, put it back into the walking box and close the side door. (8) Drive the sprinkler truck away from the water pumping location. 2.Spraying operation (1) Pull the rear handle of the four-way valve parallel to the ground, open the ball valve you want to spray (front spray, rear spray, side spray, shower), then start the engine, put the transmission into gear, and turn the power take-off Pull the switch back to put it into gear and take power, then disengage the clutch, the pump starts to run, and starts sprinkling water. (2) After the water in the tank is sprinkled, the driver should promptly push the power take-off control handle forward to disengage the gear and stop the sprinkler pump. Requirements for water sources: When the sprinkler truck uses rivers and ponds as water sources, pay attention to all ends of the suction pipes being submerged in the water. In or...

Isuzu sprinkler trucks are also called spray trucks multi-function sprinklers landscaping sprinkler water tank trucks, and water trucks. Sprinkler trucks are suitable for washing various road surfaces, trees, green belts, lawn greening, construction of roads, factories and mines, and high-altitude building washing. It has the functions of water sprinkling, dust pressing, high and low position spraying, pesticide spraying, guardrail washing and other functions. Isuzu sprinkler truck, also known as spray truck or multi-functional greening sprinkler truck. It is used for cleaning roads, sanitation, dustproofing, watering, spraying pesticides, etc. on urban roads, large factories, military units, gardens and other units to beautify the environment. It can also be used for temporary emergency firefighting. Isuzu sprinkler trucks have functions such as water transportation, drainage, and emergency firefighting. It is configured as front flush, rear sprinkler and side spray, self-priming special water pump, the pump can pump water and drain water, equipped with fire joints, gravity valve, a working platform behind the tank, and a green sprinkler cannon installed. The cannon can be rotated and the water volume can be adjusted ( The spray appears as columns, fog, drizzle). Standard configuration of Isuzu sprinkler truck (green spray truck, water tank truck): forward spray, rear spray, side spray; high side shower; rear working platform with green sprinkler anti-aircraft gun, which can be adjusted into a columnar shape with a range of ≥28m; it can also be adjusted into Mist, range ≥15m. Optional dispensing tray and spraying machine. Advanced facilities such as medicine trays, medicine pumps, anti-corrosion and anti-rust tanks, multi-directional water inlet and outlet joints, solenoid valves, pneumatic valves, etc. can also be added to meet the needs of different users. Isuzu sprinkler trucks adopt automatic assembly line tank production processes, which are divided into: blanking, automatic plate welding, head spinning forming, one-time roll forming of the tank body and other domestic advanced production processes. The tank material is mostly produced from high-quality carbon steel plates. For special purposes, 304 stainless steel can also be used according to customer needs. It consists of "pipes, valves, filtering devices, water outlets (forward spray, rear spray, side spray; high side shower; rear working platform with green sprinkler anti-aircraft gun). The engine mainly drives the gearbox, and the power take-off device installed on the gearbox The device drives the sprinkler pump, which generates power to spray the liquid inside the tank through the pipe network. Isuzu sprinkler truck sprinkler function description: The sprinkler truck is equipped with a duck-shaped nozzle or a round head nozzle in the front, a cylindrical sprinkler nozzle or a shower head nozzle in the back, and a working platform at the rear equipped with a water cannon. Sprinklers ...

The sewage suction pump of a Isuzu sewage suction truck is one of its key components and has strong suction capacity. Driven electrically or hydraulically, sewage suction pumps can generate negative pressure to quickly suck various liquid or semi-solid wastes into storage tanks. At the same time, the sewage suction pump is also equipped with a high-efficiency filtration system, which can effectively separate solid particles and liquids to ensure that the discharged waste meets environmental discharge standards. The reliability and efficiency of sewage suction pumps enable Isuzu sewage suction trucks to process waste quickly and effectively, providing important technical support for environmental cleaning and pollution prevention. 1. Selection of sewage suction pump: There are two types of pumps commonly used on the market, reciprocating vacuum pumps and rotary vane vacuum pumps. A. Reciprocating vacuum pump: Working principle, the rotation of the pulley drives the eccentric to move in a circular motion, and the eccentric drives the connecting rod to pull the piston. The piston reciprocates, causing the valve to open to pump air, and the exhaust valve to open to exhaust. It works continuously, in which During use, a few drops of engine oil need to be added per shift to lubricate the piston cylinder liner. At the same time, some of the engine oil will carry slag and other residues and be discharged out of the pump. B. Rotary vane vacuum pump: When the eccentric rotor rotates, the rotary vane soaked in engine oil slides against the inner wall of the pump under the action of centrifugal force. The volume of the suction working chamber gradually increases, and the pumped gas is sucked into it until The rotary vane rotates to the end of inhalation, and the inhaled gas is isolated. As the rotor continues to rotate, the isolated gas is gradually compressed and the pressure increases. When the pressure exceeds the pressure at the exhaust port, the gas is discharged out of the pump. During this process, the engine oil will be mixed with the pumped gas through high pressure, and then separate from the pumped gas as the pressure weakens. Due to the special working environment of agricultural fecal suction trucks, the pumped gas is not clean or contains biogas and other substances. Corrosive gas slag, after repeated mixing reactions, the oil quality of the engine oil will deteriorate and lose its lubrication effect. When found, the pump casing will be completely scrapped (even if a water vapor separator is added, corrosive gas will enter the pump) 2. According to the above characteristics, the sewage suction pump. A. Reciprocating vacuum pumps are more suitable for use in agricultural biogas tanks, septic tanks and toilets. B. The rotary vane vacuum pump has a special structure compared to the reciprocating vacuum pump, and the slag is not easily discharged. C. The oil of the rotary vane vacuum pump is very easy to deteriorate, and the reciprocating...

Isuzu compressed garbage trucks often come equipped with a hydraulic lifting system, known as a rear loader, to easily empty the contents of the truck. The rear loader lifts and dumps the compacted waste into a larger collection container at disposal sites, such as landfills or recycling facilities. The following are the basic usage methods of compressed garbage trucks 1. Drive the vehicle to the garbage collection point: Drive the Isuzu compressed garbage truck near the scheduled garbage collection point, making sure the vehicle is parked on flat ground for safe operation. 2. Open the garbage compartment door: Open the garbage compartment door by operating the control panel or mechanical device. Typically, compression garbage trucks have side or rear doors, which may open differently depending on the model. 3. Pour the garbage: Pour the garbage from the collection container or trash can into the garbage bin. Make sure to follow regulations on waste sorting and disposal, and be careful not to dispose of illegal or hazardous waste. 4. Control the compression operation: Once the garbage bin is full, the compression operation can be started by operating the control panel or buttons. This operation will cause the compression device in the garbage bin to start working, compressing the garbage into a smaller volume in order to increase the storage capacity. 5. Close the door of the compressed garbage truck: After the garbage in the garbage bin is compressed and fixed together, close the door of the garbage bin to ensure a seal. 6. Transport the garbage to the disposal site: Once the garbage compartment door is closed, drive the compression garbage truck to the garbage disposal site. During transportation, ensure that the garbage compartment door is securely closed to prevent garbage from scattering and contamination. 7. Garbage disposal and unloading: After arriving at the garbage disposal site, handle and unload the garbage in accordance with relevant regulations. This may include dumping waste into a treatment facility or site and clearing bins in preparation for the next cycle. Isuzu compressed garbage trucks also contribute to environmental sustainability, as the compacted waste takes up less space in landfills. By reducing the number of truck trips needed for waste collection and disposal, they also help to minimize fuel consumption and greenhouse gas emissions.

The Isuzu sewage suction truck is a new type of sanitation vehicle that collects, transfers, cleans and transports sludge and sewage to avoid secondary pollution. The Isuzu sewage suction truck can self-prime and discharge. It has fast working speed, large capacity and convenient transportation. It is suitable for collecting and transporting feces, Mud, crude oil and other liquid substances. The Isuzu sewage suction truck adopts the Isuzu sewage suction truck vacuum pump, which is the leading technology in the country. It has large suction power and long suction range.It is especially suitable for the suction, transportation and discharge of sludge in the sewer, especially for sucking sewer mud, silt and gravel, bricks and other larger objects.   1. Precautions for daily operation: (1) Keep the vacuum pump at an appropriate rotation speed: If the vacuum pump speed is too high, the rotor will heat up; if the speed is too low, it will cause additional impact on the conveyor and components, affecting the service life. In order to achieve a suitable working speed, please adjust the best position of the hand throttle according to the pump type in advance. (2) Self-unloading and overturning of tanks on flat ground: Dumping and overturning the tank on a sloping road will cause distortion and deformation of various components, leading to failure, and may also cause a rollover accident. (3) When dumping and turning over the tank, first open the rear tank door: Before dumping the tank and unloading mud, the locking bolts should be loosened and the rear tank door should be raised to the required angle. When the tank is fully loaded, it is forbidden to lift the tank with the rear tank door closed, otherwise there is a risk of overturning. (4) When the oil pump and vacuum pump are taking power, the engine is idling and the clutch pedal is fully depressed. After turning on the power take-off switch, slowly release the clutch pedal. (5) When the car is driving, the vacuum pump and oil pump are stopped. (6) The vehicle is not allowed to inhale materials larger than the diameter of the hose and transport waste oil and hazardous materials. (7) When entering the bottom of the tank or performing maintenance during self-loading and lifting, support rods and safety stops must be used. (8) When transporting waste, the vehicle must drive at medium or slow speeds, and must not make sharp turns or brakes, because there is no anti-wave plate in the tank and the center of gravity is high.   2. Daily maintenance matters: (1) Reasonably determine the maintenance cycle: Scientifically determining the mileage intervals of various maintenance operations can not only keep the car in good technical condition, but also save some unnecessary trouble. Generally speaking, if a new car is in good technical condition and used under good operating conditions, the maintenance period can be appropriately extended; while if the car is in poor technical condition or the operating c...

Isuzu sewage suction trucks are also called Isuzu vacuum sewage suction trucks, Isuzu sewage treatment trucks, and Isuzu sludge removal trucks. Isuzu sewage suction trucks have greater suction power than fecal suction trucks and are mainly used for the suction, loading and discharge of mud, silt, gravel, bricks or petrochemical sewage tank sludge in urban rainwater wells, sewers and ditches. The series of Isuzu sewage suction trucks produced and sold by our company are equipped with high-power vacuum sewage suction pumps, which can self-prime and self-discharge. The discharge adopts self-drainage and pressure discharge. The sewage suction tank can be hydraulically lifted and self-unloaded, and the back cover can be opened hydraulically. It has the characteristics of high vacuum degree, large tonnage, high efficiency and wide application. 1.Introduction Isuzu sewage suction trucks are divided into multiple models such as NKR/NPR/FV/GIGA, which can match the volume of 5CBM-20CBM. 2. Function The special part of Isuzu sewage suction truck is composed of power take-off, transmission shaft, vacuum suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, feces viewing window, hand washing device, etc. The vehicle is equipped with high-power vacuum suction Sewage pump and high-quality hydraulic system, the tank head is die-cast in one step, the tank can be opened backward, and the double-top self-unloading. The dirt in the tank can be dumped directly through the back cover, and it has high vacuum (greater suction power than the suction truck) ), large tonnage, high efficiency and wider uses. 3.Composition Oil-water separator, water-gas separator, hydraulic self-unloading device, special vacuum sewage suction pump, volumetric pressure gauge, suction pipe, gravity valve, vacuum tank, connector (sewage window), fully automatic anti-overflow valve, hydraulic kit . 4. Scope of application Isuzu sewage suction trucks and fecal suction trucks have the same principle, but they have different uses. The difference is that the tank of the sewage suction truck is a round tank with a tighter structure, which can withstand higher pressure and provide greater suction. It can be used to collect, clean and transport sewage and sludge. 5. Working principle Since the fecal suction hose is always immersed in the liquid surface, after the air in the fecal tank is sucked, it becomes thinner and thinner because it cannot be replenished, causing the pressure in the tank to be lower than the atmospheric pressure. The fecal liquid is used under atmospheric pressure. , into the tank through the fecal suction hose. Or because the siphon is close to the bottom of the tank, when the air is continuously discharged into the fecal tank, it is compressed because there is no way out, causing the pressure in the tank to be higher than the atmospheric pressure. The fecal liquid is discharged through the siphon and fecal suction hose under the action of the c...

The Isuzu compressed garbage truck is an indispensable piece of equipment in urban sanitation work. It can compress a large amount of garbage into small pieces and store it inside the body, thereby reducing space occupation and improving the efficiency of garbage collection and transportation. However, when using rear-loading compressed garbage trucks, leakage problems often occur inside the vehicle. If not dealt with in time, it will lead to environmental pollution and traffic safety hazards. There are many reasons for leakage problems in rear-mounted compressed garbage trucks, such as poor body sealing, aging oil seals, damaged pipelines, cylinder wear, etc. Different reasons require different treatments. 1. Check the body sealing performance. First of all, you should check whether the body sealing performance of the rear-mounted compressed garbage truck is good. If the car body seal is not good, it will cause garbage to leak out. Therefore, you should check whether the door seal is intact and whether it is deformed, aged, etc. If the door seal is damaged, it should be replaced in time. If the seal is only deformed, it can be restored after soaking in hot water. In addition, other sealing parts should also be checked, such as side seals and rear side panel seals. 2. Replace the aging oil seal. When the garbage is compressed, the compression cylinder will move to both sides. If the oil seal is aged or damaged, it will cause the hydraulic oil in the compression cylinder to leak out. Therefore, the condition of the oil seal should be checked regularly, and aging or damaged oil seals should be replaced in a timely manner. When replacing the oil seal, you should choose an oil seal with reliable quality, wear resistance and pressure resistance, and install it according to the corresponding installation requirements. 3. Repair damaged pipelines. When repairing hydraulic pipelines, appropriate connection methods and materials should be selected to ensure the sealing performance of the pipelines. 4. Replace the worn cylinder block. The compression barrel of the Isuzu rear-mounted compression garbage truck is compressed by a hydraulic cylinder. If the cylinder body is severely worn, it will affect the sealing performance of the hydraulic cylinder and cause hydraulic oil to leak. Therefore, the status of the compression barrel and hydraulic cylinder should be checked regularly, and seriously worn parts should be replaced in time. 5. Garbage truck cleaning. Clean the garbage truck, especially the garbage can and the slag collection part of the garbage truck. Make sure there is no residual trash or liquid inside the garbage truck to reduce the possibility of leaks. 6. Regular maintenance. Carry out regular maintenance and upkeep on the garbage truck, including checking and replacing seals, cleaning pipelines, overhauling the hydraulic system, etc., to ensure the normal operation of the garbage truck and reduce the occurrence of leakage problems. To sum up, ...

Isuzu compressed garbage truck consists of a sealed garbage compartment, hydraulic system and operating system. The whole vehicle is fully sealed. It is self-compressing, self-dumping, and all sewage during the compression process enters the sewage tank, which completely solves the problem of secondary pollution during garbage transportation. The key parts are made of high-quality components, which have the characteristics of high pressure and sealing. It has the advantages of good performance, easy operation and safety. According to the location of the garbage loading mechanism, Isuzu garbage trucks can be divided into front-loading, side-loading and rear-loading types; according to the state of garbage loading, garbage trucks can be divided into compression and non-compression types. The rear-mounted compressed garbage truck is also called a compression garbage truck. It is a new type of sanitation vehicle that collects, transfers and transports garbage to avoid secondary pollution. Use the after-loading device to connect with the trash can or garbage bucket, and combine them together to form a mobile garbage transfer station to achieve multiple uses in one vehicle, pollution-free garbage, and collection and transportation. It effectively prevents pollution caused by the scattering and flying of garbage during collection and transportation, improves labor efficiency and reduces labor intensity. It is a new ideal sanitation special vehicle. Isuzu compressed garbage trucks rely on mechanical, electrical and hydraulic combined automatic control systems, PLC control systems and manual operating systems. Through the special devices of the carriage, the filler and the push plate, the working process of garbage pouring, crushing or flattening, powerful filling, squeezing and compacting the garbage into the carriage, and garbage pushing is realized. The garbage collection method of compressed garbage trucks is simple and efficient; it has a high compression ratio and a large loading capacity; the operation of compressed garbage trucks is automated; it has good power and environmental protection; most of the upper and lower parts of compressed garbage trucks are made of stamped parts, which are light in weight. , the vehicle has high utilization efficiency; it has automatic repeated compression and peristaltic compression functions; the compressed garbage truck is superior to other types of garbage compression station equipment in terms of garbage compaction, garbage collection, unloading and loading, and the land area of the garbage station. The working principle of the loading mechanism of the Isuzu compressed garbage truck: under the action of the hydraulic system, through the reversal of the electronically controlled pneumatic multi-way reversing valve, the lifting and lowering of the skateboard and the rotation of the scraper are realized, and various movements of the skateboard and scraper are controlled. , the garbage poured into the filling buck...

Isuzu super sucker truck is a high-end sanitation vehicle. It has the advantages of self-priming and self-draining, fast working speed, and convenient transportation. It is mainly used for sewer sewage suction, loading and discharge, and is used in sanitation work in cities and towns. plays an important role. Let us take a closer look at the operating specifications of Isuzu super sucker trucks. 1. Pre-start inspection and preparation A. Check whether the engine oil, diesel, hydraulic oil, battery, tires, instruments, lights, etc. are normal, and check whether the safety facilities are complete. B. The rear of the septic suction truck should be as close to the operating point as possible and park. C. Open the side door of the walking platform box, take out the fecal suction hose, and swing it backward without bending. 2. Start operation A. Pump the suction hose into the liquid level as deeply as possible, ensuring that the pipe end is always less than 300mm away from the liquid level during operation. B. Push the handle of the four-way valve until it is perpendicular to the ground. C. Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch backward to put the power take-off into gear, and the vacuum pump starts running. D. The operator should pay attention to monitor the situation near the inlet of the suction hose and use appropriate tools to block debris to avoid blockage. E. The operator can pass the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified, and colleagues should quickly pull the fecal suction hose off the ground or close the four-way valve. Under normal circumstances, the buzzer will emit an audible and visual signal at this time. When the driver receives the signal, he should reduce the throttle, push the power take-off switch forward and out of gear, the vacuum pump will stop rotating, and press the buzzer switch to cut off its power supply. . F. Close the fuel tank straight-through cock handle plate parallel to the axis of the inlet mailbox. G. After flushing the hose, put it back into the walking platform box, close the side door, and make the boom face above the cab. H. Close the anti-overflow valve and make its handle perpendicular to the road axis. I. Drive the fecal suction truck away from the operation site. 3. Shutdown operation A. Point the water-absorbing hose into the sewage tank. B. Pull the rear handle of the four-way valve until it is parallel to the ground, and open the anti-overflow valve until its handle is parallel to the axis of the pipeline. C. Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch back to put the power take-off into gear, the vacuum pump starts to run, put the transmission into neutral, then start the engine, disengage the clutch, and move the power take-off Pull the switch back to sh...