Industry News

The compressed garbage truck is an innovative waste management solution designed to efficiently collect and transport large volumes of solid waste. This specialized truck employs a compactor mechanism that compresses garbage to maximize load capacity and reduce the number of trips required to transfer waste to disposal sites. 1.Usage characteristics and scope of use Isuzu rear loading and unloading garbage trucks, also known as compression garbage trucks, are special transportation equipment for sanitation. It is mainly used to collect, compress and transport urban domestic waste. It can also be used to collect, compress and transport some lightly thrown and scattered industrial and agricultural waste. It is used for the collection, transportation and unloading of bagged, barreled and bulk domestic waste in cities and towns. Special vehicles for material operations. This series of models can optionally be equipped with a rear bucket turning mechanism and a hydraulic trash can turning mechanism. The rear bucket turning mechanism is suitable for unloading and transporting garbage with a trolley or manually. The trash can flipping mechanism is suitable for 120-liter, 140-liter, 240-liter plastic trash cans and 350-liter metal trash cans. 2. The box body adopts a square warehouse structure, which is composed of a bottom frame, a box body and a push plate. The chassis is made of 16Mn steel plates of different thicknesses bent into different types of grooves and beams and welded together, and is connected to the chassis beam through steel plates and bolts. The box body consists of a bottom plate, left and right side plates, and a top plate. The bottom plate and bottom plate transverse lining are welded to the bottom frame, and the side plates have longitudinal groove slides to guide the movement of the push plate; the side plates and side plate columns are welded to stand on the bottom plate, and the top plate, top plate transverse lining and side plates are welded Connection; the rear of the box is made with an inclination angle of 20°. The push plate is composed of steel plates, grooves and beams welded together. It is installed in the box and moves longitudinally in the box through the push plate oil cylinder and guide slide. 3. The compression package consists of a filler, a sliding plate and a scraper. The filler consists of a side vertical plate frame, a bottom curved garbage filling bin, an upper cover, etc. It is welded by steel plates, troughs, and beams. The side vertical plate frame of the filler is equipped with an inclined slide to control the sliding plate and scraper. Plate movement guide; the bottom plate of the filler is made into a curved surface according to the movement trajectory of the slide plate and scraper, which is the location for garbage filling, and is equipped with a drainage outlet; the top of the filler is connected to the box through a hinge shaft, and the package and box are compressed A T-shaped sealing strip is insta...

The Isuzu sewage suction truck consists of two parts: the Isuzu chassis (ELF/FV/GIGA) and the tank body. The ground sewage suction pump is equipped with a vacuum pump and a water circulation pump. The upper part of the sewage suction truck includes an oil-water separator, a water vapor separator, a hydraulic dump device, a special vacuum sewage suction pump, a volumetric pressure gauge, a suction conduit, a gravity valve, a vacuum tank, and a connector (depending on the Manure window), fully automatic anti-overflow valve and hydraulic package. Of course, most sewage suction trucks are now equipped with water circulation pumps. Then how can we properly maintain the Isuzu sewage suction truck: 1. Precautions for the transmission: Check various connections frequently, and check the connection between the power take-off of the sewage suction truck and the sewage suction pump frequently. The connection should be reliable and operating normally, and whether the directional couplings, etc. are abnormally shaken or loose. If oil leakage is found in the power take-off and water pump during use, the seals should be replaced. If the defective parts are not repaired and continue to operate, it will bring adverse consequences to major devices such as pumps and power take-offs. 2. The oil separated by the oil and gas separator (for vacuum pump lubrication) (oil and gas separator) can be reused as vacuum pump lubricating oil, but the separated water will be stored at the bottom of the tank, so it must be drained after the operation. If you forget to drain, it will be inhaled. Failures such as sintering may occur in the pump. If the oil is used for a long time, the lubricity and air tightness will be reduced. Therefore, the interior should be cleaned regularly and the oil should be replaced. When the vacuum degree is about 93 kPa, the oil level should be replenished to the middle mark under the dipstick. Use HT-40 # mechanical oil and clean the interior once a month. 3. Gas-water separator with one-way valve (gas-water separator with one-way valve). It is a device that automatically works to prevent sewage from entering the pump in case the automatic suction stop device fails when the tank is full. Inhaling sludge with a lot of oil content will easily corrode the ball seats and balls, so replace them regularly. In addition, it is easy to accumulate sewage during operation, so the float must be drained and cleaned after the operation is completed. 4. After long-term use of the rear tank door clamping device, dirt will occur inside and the hand wheel must not be tightened. Therefore, the interior should be disassembled and cleaned every 6 months. At this time, the grease should be replenished appropriately. 5. Replenish grease: The sewage truck replenishes grease, hydraulic working oil strips and 20# mechanical oil for international use, and 30# mechanical oil for summer. 6. Add about 200 ml of oil into the pump before use t...

Isuzu garbage trucks are widely used. It is suitable for sanitation, municipal administration, factories and mines, property communities, and residential areas with a lot of garbage. One vehicle can carry multiple large compartments, which can effectively avoid secondary pollution during loading and unloading. Main uses of Isuzu garbage trucks Garbage trucks are mainly used to carry domestic garbage. They can also transport bulk construction materials such as ash, sand, stone, soil, etc. They can also transport ore or coal in mines or coal construction. Function introduction of Isuzu swing arm garbage truck: the garbage bucket can be hoisted up and down, and the swing arm has a working cycle time of 60 seconds. The characteristic of this truck is that the garbage bucket is separated from the vehicle body, which can realize the combined use of one truck and multiple garbage buckets for cyclic transportation. It fully improves the transportation capacity of the vehicle and is especially suitable for short-distance transportation, such as the cleaning and transportation of urban garbage by the environmental sanitation department. Detailed introduction of Isuzu compression garbage truck Compressed garbage truck: It adopts electromechanical and hydraulic integration technology and uses a mechanical, electrical and hydraulic combined automatic control system to realize garbage loading, crushing or flattening, and powerful filling through special devices such as carriages, loaders, and push shovels. Finally, the garbage is compacted and squeezed into the carriage, and transported to the destination for automatic push and unloading. Its outstanding features: simple and efficient garbage collection method, repeated compression and other functions, high compression ratio, large loading mass, automated operation, good power and environmental protection, and high vehicle utilization efficiency. Introduction to compressed garbage trucks: Compressed garbage trucks mainly use special devices such as garbage compartments, fillers, shovels, and hydraulic systems to dump, crush or flatten garbage. They are convenient and efficient in garbage collection and can automatically and repeatedly compress. Garbage, as well as the characteristics of compression function, high compression ratio, large loading capacity, automated operation and good sealing. The compressed garbage truck is fully sealed. The sewage during the compression process directly enters the sewage compartment, completely solving the secondary pollution during the garbage transportation process. The key components are imported. Equipped with a hanging bucket lifting frame, it can be used with the nationally-used iron buckets or plastic hanging buckets and loaded with force to push the garbage into the carriage and compact and push it away. The significance of Isuzu garbage trucks Garbage trucks are mainly used for municipal sanitation and large factories and mines to transport various garbage, especiall...

Regularly inspect the garbage truck for any wear or damage to important components such as wheels, hydraulic systems, and the body of the truck.Follow the manufacturer's recommended maintenance schedule for oil changes, filter replacements, and other routine maintenance tasks. 1. Tire pressure is too high The tire inflation pressure of wheeled engineering machinery is an important factor that determines its service life and work efficiency. Tire pressure that is too high or too low will affect its service life and is not conducive to safe driving, especially in hot summer. The scientific inflation specification should be: based on the tire's standard air pressure, the tire pressure should be slightly adjusted as the temperature changes. For example: summer should be 5%-7% lower than winter, because considering that the temperature in summer is high, the gas is heated, and the pressure increases. On the contrary, in winter, the standard air pressure must be reached or slightly lower. 2. Boil the water tank and add cold water. Overloading of the engine, poor heat dissipation or lack of water in the water tank will cause the water tank to boil. If cold water is added immediately at this time, the cylinder head and cylinder body will burst. Therefore, once the water tank is found to be boiling during use, emergency measures should be taken to stop the operation and allow the diesel engine cooling water to cool down on its own. 3. New cylinder liners and pistons can be installed without optional accessories. When replacing the cylinder liner and piston, it is considered that the new cylinder liner and piston are standard parts and are interchangeable, and they can be used as soon as they are installed. In fact, the dimensions of the cylinder liner and piston have a certain tolerance range. If the largest size cylinder liner is matched with the smallest size piston, the matching gap will be too large, resulting in weak compression and difficulty in starting. Therefore, when replacing, you must check the size grouping codes of the standard cylinder liner and piston. The cylinder liner and piston used must make the size grouping code of the standard piston the same as the size grouping code of the standard cylinder liner. Only in this way can the difference between the two be guaranteed. With standard fit clearance. In addition, when installing cylinder liners and pistons with the same group code in each cylinder, attention should also be paid to checking the cylinder plug clearance before installation. In order to ensure the installation standards, an inspection should be carried out before installation to prevent the installation of counterfeit and inferior products. 4. Failure to check plunger stroke allowance During the test of the plunger fuel injection pump, many maintenance personnel do not pay attention to checking the stroke margin of the plunger. The so-called stroke allowance of the plunger refers to the amount of movement that the plunger can...

Maintenance is an effective means to restore the performance of special vehicles such as Isuzu garbage trucks and extend their service life. However, in the actual operation process, some operators and maintenance personnel have many wrong practices, which affects the normal use of special vehicles. 1. Only add engine oil but don’t change it Engine oil is indispensable in the use of diesel engines. It mainly plays the functions of lubrication, cooling, and cleaning. Therefore, many drivers will pay attention to check the amount of lubricating oil and add it according to the standard, but they ignore the inspection of lubricating oil quality and the replacement of deteriorated oil, resulting in some engine moving parts always in poor condition. It operates in a slippery environment, thereby accelerating the wear of various parts. Under normal conditions, the loss of engine oil is not large, but it is easily contaminated, thus losing the role of maintaining the diesel engine. During the operation of the diesel engine, a lot of contaminants (soot, carbon deposits and scale deposits generated by incomplete combustion of fuel, etc.) will enter the engine oil. For new or overhauled machines, there will be more impurities after trial operation. If you rush to put them into use without replacing them, it will easily cause accidents such as burning tiles and holding the shaft. In addition, even if the engine oil is changed, some drivers, due to lack of maintenance experience or trying to save trouble, will not thoroughly clean the oil passages during the replacement, leaving mechanical impurities still remaining in the oil pan and oil passages. 2. Use butter indiscriminately (1) Apply butter to the cylinder gasket. Butter is a grease commonly used in construction machinery repairs, which can provide lubrication and sealing. Therefore, when some repairmen install the cylinder gasket, they will apply a layer of butter on the cylinder gasket, thinking that this can increase the sealing performance of the diesel engine. As everyone knows, doing so will affect the performance of the diesel engine. The cylinder gasket is the most important seal between the diesel engine cylinder block and the cylinder head. It can not only seal the high-temperature and high-pressure gas generated in the cylinder, but also seal the cooling water and lubricating oil in the cylinder head and cylinder body. Therefore, when disassembling When installing the cylinder gasket, pay special attention to its sealing quality. If butter is applied to the cylinder gasket during installation, when the cylinder head bolts are tightened, part of the butter will be squeezed into the cylinder water channel and oil channel. The butter left between the cylinder gasket will be affected by the high temperature when the cylinder is operating. It will flow into the cylinder and burn out, while the other part will remain on the separation surface between the cylinder block and the cylinder head, causing...

The brand new Isuzu cleaning and sewage suction truck will not have low suction power. When the Isuzu cleaning and sewage suction truck is used for a long time and the components are too worn, insufficient suction may occur. The suction power of the cleaning and sewage suction truck is insufficient. Reducing the suction range of the sewage suction truck prevents the extraction of high-concentration sewage. So what is the reason why the suction power of the cleaning and suction truck is insufficient? As a truck user, we believe many people are concerned about this issue. 1. Air leakage: Cleaning the sewage suction truck uses a vacuum pump to discharge the air in the tank to form a vacuum, forming a negative pressure. The air pressure is used to generate suction to suck the dirt into the tank. If the sewage suction tank, sewage suction pipeline, and vacuum exhaust truck are cleaned, If there is a leak in the air pipe, the vacuum cannot be achieved in the tank, and naturally it will not be able to generate enough suction. 2. The valve of the sewage suction pipeline is closed or the sewage suction pipeline is blocked: The valve of the sewage suction pipeline is closed or insufficiently opened, or the sewage suction pipe is blocked. Although the cleaning sewage suction truck generates sufficient suction, the suction is blocked in the valve or pipe, and the sewage cannot enter the sewage suction tank smoothly and smoothly. , thus causing the sewage suction speed to slow down and causing the illusion of low suction power of the sewage suction truck. 3. Vacuum wear of cleaning sewage suction truck: There are two aspects of vacuum wear, one is the wear of the pump casing and the other is the wear of the scraper. A vacuum pump will naturally wear out after being used for a long time. If the pump casing is severely worn, the inner wall of the casing is not smooth, and grooves appear, it is generally of no repair value and the pump must be replaced directly. Scraper blade wear is common. After the scraper blade is worn, it cannot adhere to the inner wall of the sewage pump to form a vacuum, and the scraper blade needs to be replaced in time. 4. The exhaust pipe is not smooth: The scheduled route for cleaning the sewage suction truck starts from inside the tank. The discharged gas flows from the anti-overflow valve along the exhaust pipe to the water vapor separator. After the water vapor separator enters the vacuum pump along the pipeline, the gas that needs to be discharged is The oil is forcibly squeezed out of the vacuum pump, passes through the oil and gas separator, and is discharged out of the vehicle. In other words, if the anti-overflow valve, air pipe, and water vapor separator are blocked, the exhaust will be blocked and sufficient suction will not be generated. 5. The engine and vacuum pump of the cleaning sewage suction truck are improperly selected and cannot meet the needs: This requires us to pay more attention wh...

Many special-purpose vehicles, such as cleaning sewage suction trucks, often experience oil leakage during use. It will directly affect the technical performance of the cleaning and suction truck, lead to a waste of lubricating oil and fuel, consume power, affect the cleanliness of the vehicle, and cause environmental pollution. Due to oil leakage and reduced lubricating oil inside the machine, poor lubrication and insufficient cooling of the machine parts will lead to early damage to the machine parts and even leave hidden dangers of accidents. Therefore, oil leakage from sewage suction trucks is an important part worthy of our attention.   1. Common main reasons for oil leakage in cleaning and suction trucks: A.The quality, material or workmanship of the product (accessories) is poor; there are problems with the structural design. B.Improper assembly speed, unclean mating surfaces, damaged or displaced gaskets, or failure to install according to operating procedures. C.Uneven tightening of the fastening nuts, broken or loose slide wires, etc. may lead to work failure. D.After long-term use, the sealing material wears out beyond the limit, ages, deteriorates, deforms and fails. E.Too much lubricating oil is added, the oil level is too high or the wrong oil is added. F. The joint surfaces of parts (side covers, thin-walled parts) are deflected and deformed, and the shell is damaged, causing lubricating oil to seep out. G.After the breather plug and one-way valve are blocked, oil leakage will often occur at weak sealing points due to the difference in air pressure between the inside and outside of the tank shell.   2. Measures to prevent oil leakage from cleaning and suction trucks A. Pay attention to the padding effect. The gaskets between parts of the resting parts of the car (such as joint end faces, end covers, casings, cover gaskets, flat enamel covers, etc.) play a leak-proof sealing role. If the materials, production quality and installation do not meet the technical specifications, the sealing and leakage prevention effect will not be achieved, and an accident may even occur. For example, the oil pan or valve cover is difficult to compact due to the large contact area, thus causing oil leakage.   B. All types of fastening nuts on the vehicle must be tightened to the specified torque. If the gasket is too loose and not tight enough, the gasket will leak; if it is too tight, the metal around the screw hole will bulge or the thread will slip, causing oil leakage. In addition, if the oil pan drain plug is not tightened or loosened and falls off, it is easy to cause oil loss, which may lead to machine damage accidents such as "burning tiles and holding the shaft".   C. Replace failed oil seals promptly. Many moving parts on the car (such as oil seals and O-rings) will be improperly installed, and the journal and the oil seal cutting edge will be out of concentricity and deflect, causing oil leakage. ...

As the requirements for environmental sanitation in various countries around the world increase, sewage suction trucks are used more and more frequently. They effectively reduce environmental pollution and are one of the sanitation and greening trucks. Sewage suction trucks are a type of sanitation vehicle. They are mainly new sanitation vehicles used to collect, transfer, clean and transport sludge and sewage to prevent secondary pollution. Because sewage suction trucks can self-prime and discharge, their working speed is fast, and they are Pebbles and larger rocks in sewers can also be easily sucked away, making them trusted by a wide range of users. So what does a qualified sewage suction truck driver need to do during the operation?   1. The suction power of the sewage suction truck mainly comes from the vacuum pump, so the vacuum pump is very important. The vacuum pump must maintain a suitable number of revolutions. If the vacuum pump speed is too high, the rotor will heat up; if the speed is too low, it will cause additional impact on the engine and parts. Affects the service life. In order to achieve a suitable operating speed, the best position of the hand throttle must be adjusted in advance according to the pump type. 2. It is best to choose a relatively flat position for unloading sewage. Sewage suction trucks are generally equipped with a lifting dump system, which can dump and unload materials by themselves. Therefore, it is prohibited to unload sewage on uneven or even skewed roads when dumping. , when unloading dirt on a slant road, vehicle parts are easily deformed and malfunctioned, and may also cause a rollover accident. 3. When unloading contaminants, open the back cover of the tank first. Before unloading contaminants, loosen the locking bolts and lift the back cover to a suitable angle. When the tank is full, it is prohibited to open the back cover with the back cover closed. Lift the tank, otherwise the center of gravity will shift backwards, which may easily cause a rollover accident. 4. When the oil pump and vacuum pump are taking power, the engine is idling, fully step on the clutch pedal, turn on the power take-off switch and then slowly release the clutch pedal. 5. When the sewage suction truck is moving, the vacuum pump and oil pump are in a suspended working state. 6. Do not use sewage suction trucks to inhale and transport waste oil and hazardous materials to avoid causing fires, explosions and other serious accidents. Remember: safety first! 7. When the sewage suction truck tank is lifted to enter the bottom of the tank or for maintenance, support rods and safety stops must be used. 8. When the sewage suction truck is transporting waste, the vehicle's traveling speed should be kept at a medium or slow speed, and sharp turns and sudden brakes are not allowed. This is because generally small sewage suction trucks do not have anti-wave partitions inside the tanks. , and the cente...

Isuzu Common faults of compressed garbage trucks can include issues with the hydraulic system, electrical system, or mechanical components. Here is an analysis of each Hydraulic System Faults: Leaking hydraulic fluid: This can occur due to worn-out seals or damaged hydraulic hoses. It leads to reduced efficiency and may cause environmental pollution. Weak or slow compaction: If the hydraulic system doesn't generate enough pressure, the compaction process may be weak or slow. This can impact the garbage truck's ability to handle large loads efficiently. Electrical System Faults: Malfunctioning control panel: The control panel is responsible for operating the compaction process, opening and closing the rear door, and activating safety features. Any electrical fault in the control panel can lead to improper functioning or complete failure of these functions. Battery or charging system issues: Problems with the battery or charging system can result in the inability to start the garbage truck or keep the electrical system functional. This can cause delays in garbage collection schedules. Mechanical Component Faults: Worn-out blades or shredders: The blades or shredders responsible for breaking down the garbage can become dull or damaged over time. This reduces efficiency in the compaction process and may lead to jamming or clogging. Damaged rear door or hopper: The rear door and hopper are critical components for loading and unloading garbage. If they become damaged or misaligned, it can result in difficulties in emptying the contents or secure closure, leading to spillage or safety hazards. Other Common Faults: Overloaded or unbalanced load: The garbage truck's capacity has limits, and overloading or uneven distribution of the load can strain the mechanical and hydraulic systems, resulting in premature wear and tear. Tire and suspension issues: The constant heavy loads carried by compressed garbage trucks can cause tire wear, punctures, or damage to the suspension system. This can lead to reduced stability and handling, affecting the driver's control. To prevent these faults, regular maintenance and inspections are crucial. Timely replacement of worn-out components, adherence to load capacities, and proper training for drivers can help minimize these common faults in compressed garbage trucks.

The service life of a compressed garbage truck depends on the driver's operation and daily maintenance. Regular driving will not reduce the service life of the car. As the maintainer of public facilities, the driver should maintain the health of the car. "A car is maintained, not repaired." The service life of a car is directly proportional to its maintenance. 1. Difficult to start. Reaction phenomenon: multiple ignitions, the engine will not start. Cause analysis: The engine is started by relying on the battery's current to push the spark plug to ignite. Therefore, a failure in the starting system is likely to be caused by battery rust or battery fluid leakage. Maintenance: Check whether the positive and negative terminal contacts of the battery are rusty or dirty. If so, go to the repair station to clean them in time to keep the circuit open. After the battery is repaired, the battery's retirement time can be delayed, and the environmental pollution caused by resource deployment and discarded batteries can be reduced. 2. Decreased power function. Reaction phenomena: engine power performance decreases, fuel consumption increases, and nozzles become clogged. Cause analysis: This is most likely caused by insufficient oil combustion and increased carbon deposits in the engine due to the engine oil, oil filter, air filter and gasoline (diesel) oil filter not being changed for a long time. Maintenance: It is recommended that the engine oil and oil filter should be replaced every time the maintenance kilometers are driven, and the air filter and gasoline/diesel filter need to be replaced every 10,000 kilometers, otherwise the air, fuel and oil Impurities in the oil will cause parts to wear and clog the oil circuit, thus affecting the normal operation of the engine. 3. Increased exhaust pipe noise. Reaction phenomenon: The noise of the engine exhaust increases, and the exhaust gas emissions also exceed the standard. Cause analysis: The engine exhaust gas undergoes oxidation due to high temperature, which is likely to cause leakage in the exhaust system. Maintenance: Check whether the pipes and interfaces of the exhaust system (especially the muffler, etc.) are corroded by exhaust gas, and whether the interface pads are washed away. If leakage is found in the exhaust system, the leaking parts should be repaired or replaced in time. Each inspection can not only ensure the normal operation of the exhaust system, but more importantly, reduce the environmental pollution caused by harmful substances in the exhaust gas. 4. Increased fuel consumption. Response Phenomenon: Car fuel consumption continues to increase Cause analysis: Insufficient tire pressure will not only increase driving resistance and fuel consumption, but also affect the service life of the tires. Maintenance: Prepare your own tire pressure measuring device and check the tire pressure frequently. Remember not to forget to check the spare tire, so as not to find out that the spa...

Many customers have purchased our Isuzu sewage suction trucks, but after two years, the difference is huge. Some sewage suction trucks have already begun to cost a lot to maintain, but some sewage suction trucks are at their peak performance. What is the reason for such a big difference? Some customer said that there may be a difference in the quality of the sewage suction trucks, while others say that there is a difference in the operation of the sewage suction truck drivers. Everyone is right, the length of use of the sewage suction truck is related to its quality and use. It is of course best to buy from a big brand like ours, POWERSTAR, as the after-sales service is guaranteed. However, when a sewage suction truck is purchased, its quality has been determined and cannot be changed. Then we can extend the service life of the sewage suction truck through correct and reasonable use and maintenance. We'd better do the following: 1. Change engine oil regularly: Engines that are regularly lubricated will have a longer service life. Over time, the engine oil becomes dirty, which will reduce or even lose the lubricating effect of the engine oil and accelerate engine wear. While synthetic motor oil lasts longer, it can also degrade or become contaminated. If you change the oil regularly and use the right grade of oil, you can keep the inside of your truck's engine clean and well lubricated. When the Isuzu sewage suction truck is driving and operating, the engine will consume oil, and low oil volume will also increase engine wear. Therefore, please check the oil level regularly and replenish the oil in time. 2. Ensure that all types of lubricating oil required by the sewage suction truck are sufficient and clean: the condition of the automatic transmission depends on the usage of the transmission fluid. The same goes for brakes, steering, engine cooling, gearboxes and differences between front and rear. All kinds of lubricants required by septic suction trucks are crucial to your car. They will evaporate, leak or deteriorate over time, so please replace and replenish them promptly when the lubricant volume is low. You can find the type of lubricant required for a septic suction truck in the vehicle care instructions in the owner's manual of the suction truck chassis. 3. Identify problems as early as possible: If any small problems can be discovered early, they can be prevented and save you a lot of repair costs. Always pay attention to abnormal performance and sounds of the vacuum suction truck. The warning light is always on, the engine temperature is higher than normal, there is oil leakage under the car, unusual noises and odors when bumping or braking, a different feeling when driving, poor acceleration, lubricating oil on the wheels, and the brake pads feel weird, etc. Small clues should be checked in time. 4. Pay attention to maintaining the car body: If the place where you live is humid and metal is prone to rust, please perform anti-rust mainte...

Now let me introduce to you the uses of Isuzu garbage trucks. Which choice is more practical? There are many types of garbage trucks on the market. First, we will introduce the classification of garbage trucks according to their uses. The types of sanitation garbage trucks are divided into: compression garbage trucks, swing-type garbage trucks. Boom-type garbage trucks, docking-type garbage trucks, sealed garbage trucks, and hook-type garbage trucks. 1. Purpose of compressed garbage truck: Compressed garbage truck, also known as compactor truck, uses a hydraulic mechanism to compress and compact the collected garbage or waste materials. The technology allows waste to be collected and transported more efficiently by reducing waste volume and maximizing the load capacity of trucks. Mainly used for collection, loading and transportation of domestic waste. The compressed garbage truck is a sealed garbage bin that automatically compresses, dumps, and automatically discharges sewage into the sewage tank, completely solving the second pollution during garbage transportation and reducing the inconvenience of human operation. It has good sealing, easy operation, safety, strong practicability and high pressure. It reduces the area occupied by garbage and makes it smaller in size. It is safe and practical. 2. Swing-arm garbage truck usage: Swing-arm garbage trucks are designed for efficient garbage collection and transportation. Due to their various advantages and features, they are commonly used by waste management companies and municipalities. It is widely used in urban streets, communities, schools and other garbage recycling points. It is a universal garbage bucket. Multiple buckets are equipped with one truck for operation. Multiple garbage buckets are placed at each garbage point for long and short distance transfer operations. It has a self-unloading function and hydraulic lift. wait. Safe and stable, reliable performance. According to function, it can be divided into: pit-type swing arm and ground-type swing arm. 3. Hook-arm garbage truck usage: Hook-arm garbage trucks use a hydraulic hook-arm mechanism to transport and collect large garbage containers. The hook-arm technology allows the truck to lift and empty containers without manual labor, providing significant efficiency and efficiency for garbage collection. convenient. The hook arm mechanism consists of a metal arm that attaches to the rear end of the truck. The arm extends and retracts hydraulically and has a hook or claw-like attachment at the end. The hook is designed to be firmly fixed on the lifting bag of the container to provide a stable connection during the hoisting process. It is used in garbage recycling stations such as domestic garbage, hospitals, properties, streets, etc. The car can be placed at garbage collection points, and one car is equipped with multiple The bucket is used for transportation operation, which is safe, economical and practical. It can be modified according t...