Isuzu fuel truck

Isuzu fuel delivery truck is an indispensable oil transportation tool on the market. With the upgrading of products, many customers have a lack of knowledge about the overall maintenance and daily maintenance of tank trucks, fuel trucks and oil transport trucks. As a result, the tanker truck is prone to abnormal damage during use. Isuzu fuel delivery trucks will undergo strict inspection before leaving the factory. After the tank is formed, the workshop will conduct an air tightness test. After the vehicle is assembled, there will be a water test. The Technical Supervision Bureau will inspect and issue the finished product after it leaves the warehouse. Tank inspection report.

The following summarizes 16 issues that should be paid attention to in daily maintenance of Isuzu fuel delivery truck:

1. The driving part that carries the oil tank, in popular terms, is the car chassis. Most drivers are quite knowledgeable about this. The problem is that after installing the oil pump in the tank lorry truck, we take power from the engine and install the drive shaft and power take-off. With these two devices, we need to pay special attention during operation. Improper operation of power take-off The device was scrapped.

2. Use and maintenance of oil pump. Before operating the oil pump, check whether the oil level in the oil pump is sufficient. Using the oil pump with a low oil level may cause damage. Regularly check whether the oil pump filter element of the oil pump is blocked by impurities. If necessary, clean or replace the filter element in time.

3. Read the user manual carefully before using the diesel bowser tank truck tanker, and operate the tanker correctly according to the instructions. This can prevent operating errors from causing damage to the dispenser.

4. The oil discharge is slow and the oil cannot be discharged. Please check the safety valve and filter net. These should be checked frequently and cleaned.

5. Oil tanks and pipeline systems should be cleaned regularly. Regularly check whether the joints of the piping system of oil tanker trucks are well connected and sealed reliably.

6. To ensure the cleanliness of the oil tank, the oil tank and the oil delivery system should be cleaned regularly. The internal and external joints at both ends of the oil delivery hose should be regularly coated with lubricating oil to make it easy and convenient to disassemble and assemble. After each work on the oil pipe is completed, the inlet and outlet outer end caps (capping caps) and both ends of the oil delivery hose (capping caps) should be capped in time to ensure that the inside of the pipe is clean.

7. The oil loading capacity should not exceed the rated loading quality. (Converted based on oil density).

8. The pump inlet screen should be removed and cleaned frequently to prevent oil residue from clogging the filter screen and affecting the flow rate.

9. The breathing valve should be kept clean and in working condition. The spring in the valve should not be replaced at will to avoid affecting the suction and deflation effects. When the breathing valve is blocked, there is a risk of tank deformation.

10. In order to prevent fire accidents in oil tanker trucks, when the exhaust pipe or muffler is damaged, the pipeline leaks oil, or the conductor is damaged or broken, it is not allowed to use metal objects to knock the parts of the oil tanker truck to avoid generating sparks and oil. Firefighting equipment should be ready on the vehicle at all times.

11. If the sedimentation tank under the oil tank is frozen, do not bake it with fire. You can use hot steam to melt it or drive the car into a greenhouse to thaw it.

12. Before operating the Isuzu tank lorry truck, a lightning rod must be inserted into the moist soil, and the grounding tape should be grounded. During the operation, good static electricity conductivity should be maintained at all times.

13. Check the fire extinguisher device before leaving the vehicle. Diesel bowser tank truck users should be familiar with the use of fire extinguishers and perform inspections and maintenance according to its instructions.

14. Before operating the Isuzu tank lorry truck, check whether the pipeline system is leaking oil, whether the grounding wire is disconnected, and whether the exhaust pipe is damaged. If any problems are found, they should be solved first before starting the operation.

15. When measuring oil, relevant regulations should be . In winter, if there is water in the self-priming pump, it must be drained to prevent the pump body from freezing.

16. When you need to enter the oil tank to work, you should pay attention to good ventilation and there must be someone outside the tank to protect you. If necessary, clean the tank with soapy water before operating.