Isuzu concrete mixer truck is a mechanical equipment specially used for mixing, transporting and pumping concrete. Isuzu concrete mixer truck is one of the indispensable equipment on construction sites. It can evenly mix raw materials such as cement, sand, water and additives, and transport them to the construction site. It is an indispensable role in the concrete construction process. . In order to ensure the normal operation and work efficiency of Isuzu concrete mixer truck, it is necessary to establish a complete set of operating procedures to improve construction quality and safety.
1. Preparation work before operation
1). Check whether the appearance of the Isuzu mixer truck is in good condition. If there is any damage or abnormality, report it to the maintenance department immediately.
2). Check whether the hydraulic system, electrical system, transmission system and other equipment of the Isuzu mixer truck are operating normally. If there are any abnormalities, they should be repaired in time.
3). Check whether the mixing tank of the Isuzu mixer truck is clean. If there is any residue, clean it.
4). Check whether the fuel tank of Isuzu mixer truck is sufficient. If it is insufficient, refill it in time.
5). Check whether the tire pressure of the Isuzu mixer truck is normal. If not, adjust it.
2. Preparation of water supply system
1). Ensure that the water quality of the Isuzu concrete mixer truck water supply system meets the requirements and is free of impurities and pollutants.
2). Check whether the pipeline of the Isuzu concrete mixer truck water supply system is smooth and whether the water pressure is normal. If there are any abnormalities, they should be eliminated in time.
3. Control system preparation work
1). Check whether the electrical connection of the control system is normal and whether all buttons and switches are flexible and available.
2). Check whether the display screen is working properly and whether the instrument is accurate.
4. Operation steps
1). Before starting the Isuzu mixer truck, check the flexibility and availability of the brakes, clutch, throttle and other operating devices.
2). Follow the instructions on the operation panel to start the mixer truck's engine and adjust the throttle so that it is at the appropriate operating speed.
3). Before starting the water supply system, rotate the mixing tank 10-15 times to fully mix the residual concrete inside with water.
4). Start the water supply system, adjust the water supply as needed, and pay attention to the stability of the water supply system.
5). Start the mixing system and adjust the speed of the mixing tank and mixing time as needed to ensure uniform mixing.
6). During the construction process, the Isuzu mixer truck should keep driving steadily and avoid dangerous actions such as sudden braking and sharp turns.
7). After the construction is completed, turn off the mixing system and water supply system, and stop the engine.
5. Safety precautions
1). When driving, the Isuzu mixer truck should follow road traffic rules and obey the speed limit.
2). Obvious safety signs must be set up at the construction site to prohibit idle personnel from entering the dangerous area.
3). During the mixing and transportation process of Isuzu mixer truck, the driver should remain alert and always pay attention to the surrounding environment and the safety of workers.
4). When performing maintenance and upkeep on the Isuzu mixer truck, the power supply must be cut off and touching of rotating parts and transmission systems is prohibited.
By formulating and strictly implementing the operating procedures of Isuzu concrete mixer truck, the mixing quality and mixing uniformity of concrete during the construction process can be ensured, and construction efficiency and work safety can be improved. At the same time, safety awareness education and operating skills training should be strengthened in the operating procedures to improve the safety awareness and technical level of drivers and operators and reduce the occurrence of construction accidents.