Isuzu refrigerated truck

In the logistics industry, Isuzu refrigerated truck refrigeration units are widely used in the transportation of food, medicine and other commodities. Proper use of refrigeration units ensures the quality and freshness of your goods, ensuring they remain at the right temperature throughout the transportation process.

Isuzu refrigerated truck refrigeration unit requires a series of preparations before starting. First check its oil level and water level to make sure they are within the normal range. Then, check the refrigerant of the cold machine to make sure it is sufficient. At the same time, it is also necessary to check whether the power connection and cables of the cold machine are intact, and perform necessary maintenance and cleaning.

The startup steps of the Isuzu refrigerator van truck refrigeration unit are as follows:

1. Open the cab door of the refrigerator van truck and adjust the parameters of the control panel. Set the appropriate temperature and humidity according to the characteristics and requirements of the transported goods.

2. Turn on the power switch of the cooling machine and adjust the refrigeration switch on the control panel to cooling mode. At this time, the compressor of the cold machine starts to work and the refrigerant starts to flow.

3. After the cooling machine has been working for a period of time, you can confirm the cooling effect of the cooling machine by observing the thermometer. If the temperature is still too high or fluctuates widely, parameters on the control panel may need to be adjusted.

4. During transportation, the temperature and humidity of the refrigerated truck should be checked regularly and adjusted as needed. At the same time, pay attention to monitoring the working status of the refrigerator van truck refrigeration unit to ensure its normal operation.

5. When the transportation is completed, the power switch of the refrigeration machine needs to be turned off in time, and the refrigeration switch on the control panel must be turned off. Then, clean and maintain according to the prescribed procedures to ensure the normal use of the refrigeration unit of the refrigerated truck.

When using the Isuzu freezer box truck refrigeration unit, you also need to pay attention to the following matters:

1. Avoid parking the freezer truck in a place exposed to direct sunlight to prevent the temperature inside the vehicle from being too high.

2. Avoid parking the freezer truck in humid places to prevent excessive humidity in the vehicle.

3. During transportation, avoid frequent alarms to open and close the rear door of the Refrigerated Truck to reduce the loss of cold air.

4. When the Refrigerated Truck is parked for a long time or not in use, the power switch of the refrigerated truck should be turned off and the rear door of the Refrigerated Truck should be sealed to save energy and extend the service life of the refrigerated truck.

Proper use of Isuzu refrigerated trucks is crucial to ensuring the quality and freshness of your goods. By following the correct steps to start and operate the refrigeration machine, and paying attention to some details and matters, you can effectively maintain the appropriate temperature inside the refrigerated truck and ensure that the goods are in good condition during transportation. At the same time, regular maintenance and cleaning can extend the service life of the chiller and improve its working efficiency.