Industry News

ISUZU sewage suction trucks and ISUZU cleaning sewage suction trucks are both sanitation vehicles and play their respective roles in environmental construction. ISUZU sewage suction trucks are mainly used for sewer sewage treatment in some urban communities and sewage treatment in some factories and enterprises. Sewage suction trucks are special-purpose vehicles. It is inevitable that some faults will occur after a long time of use, which will affect work efficiency. Therefore, it is best for us to master some emergency measures for sewage suction trucks, which may be able to solve urgent problems at critical moments.

1. The oil tank leaks. This situation must be dealt with in time, otherwise other dangerous accidents may easily occur. At this time, you can wipe the oil leakage clean first, and use soap or bubble gum to apply to the oil leakage area to temporarily plug the leak. If there is epoxy Resin adhesive is better. Use it directly to repair, and the effect will be better.

2. The oil pipe is broken. In this case, you can first wipe the rupture clean, apply soap or use tape to wrap around the rupture of the entire oil pipe, tie it tightly with iron wire, and then apply a layer of soap.

3. The oil pipe is broken. In this case, you can find a rubber or plastic pipe with the same diameter as the oil pipe to connect it. If the sleeve is not tight enough, the two ends can be tied tightly with iron wire to prevent oil leakage.

4. If there are blisters in the cylinder head of the sewage suction truck, resulting in oil and water leakage, you can select an electrician's fuse of corresponding specifications according to the size of the blisters, and gently smash it into the blisters with a hand hammer to eliminate oil and water leaks.

5. There is oil leakage at the oil pipe joint. When the sewage suction truck is in use, if there is oil leakage from the engine oil pipe joint, this situation is mostly caused by the poor sealing between the oil pipe bell mouth and the oil pipe nut. At this time, you can use cotton yarn to wrap under the horn. Then tighten the oil pipe nut and the oil pipe joint. You can also chew gum or maltose into a paste and apply it to the oil pipe nut seat. After it dries and solidifies, it can play a sealing role.

6. The inlet and outlet hoses of the sewage suction truck are cracked. If the crack is small, you can use a cloth strip to simply wrap the leakage. If the crack is large, it is best to put a bamboo pipe or iron pipe on the cracked area and use iron wire to tie it. tight.

7. The fan belt is broken. At this time, you can wrap the broken belt with iron wire, or drive the car away by starting and stopping.

8. Screw hole slider. Screw hole slider will cause oil leakage or loosening of the connecting rod, making it unable to work. At this time, the original screw can be flattened with a hammer to expand both sides, and then tightened. This way The method cannot be used multiple times. After emergency, go to the maintenance station for repair in time.