Industry News

Isuzu sewage suction truck is a special type of vehicle used for the collection and transportation of sewage, waste water, and other liquids from various sources such as drainages, septic tanks, and other similar places. It is designed with a tank at the rear of the vehicle, usually made of steel or other durable materials, which is capable of holding a large volume of liquid. Isuzu sewage suction truck is equipped with a powerful vacuum pump system that creates a vacuum to suck up the sewage and liquid waste into the tank. Isuzu sewage suction trucks are typically used by municipal authorities, waste management companies, and sanitation departments to maintain clean and hygienic environments.

1. Maintain the appropriate rotational speed of the vacuum pump of the Isuzu sewage suction truck:

If the vacuum pump rotational speed is too high, the rotor will heat up. If the rotational speed is too low, it will cause engine knocking and cause additional shock to the components, which will affect the service life. At the appropriate working speed, adjust the maximum adjustment of the hand throttle in advance. Sewage suction truck pump type xd-44 is suitable for rotation speed of 500-600 rpm.

2. The isuzu sewage suction truck is hydraulically lifted and dumped on flat ground. Isuzu sewage suction trucks are strictly prohibited from hydraulically lifting and dumping on sloping roads. If they are hydraulically lifted and dumped on sloping roads, the uneven road surface will cause the weight of the vehicle body to tilt to one place, causing distortion and deformation of the components there, and easily causing a rollover accident.

3. When hydraulically lifting the isuzu sewage suction truck, open the rear door window first. The rear door of the tank should be opened before hydraulic lifting to unload sludge. It is strictly prohibited to hydraulically lift the tank body of the isuzu sewage suction truck before opening the rear door of the tank, because the center of gravity will shift backward after lifting, which may cause the risk of overturning.

4. When taking power from the clutch oil pump and vacuum pump power take-off of the isuzu sewage suction truck, the driver should control the accelerator, make the engine idle, and fully step on the clutch pedal. After hooking up the power take-off to take power, the driver should slowly release it. Clutch pedal. Do not hang up the power take-off without depressing the clutch, otherwise the power take-off gear will hit the running gearbox gear, causing damage to both gears. The power take-off lever of the Isuzu sewage suction truck must be placed in the middle position when the vehicle is driving.

5. Do not use isuzu sewage suction trucks to inhale or transport waste oil and dangerous goods. When entering or repairing the sludge tank of Isuzu sewage suction truck while the sludge tank is hydraulically lifted, support rods and safety stops must be used. When transporting sewage, a manual rear door tank clamping device must be used. Since there is no anti-wave plate in the tank and the center of gravity is high, the vehicle must drive at a medium or low speed and cannot make sharp turns or brakes.