Industry News

Product brief description The compressed garbage truck consists of a sealed garbage compartment, a hydraulic system, and an operating system. The whole vehicle is fully sealed. It is self-compressing, self-dumping, and all sewage during the compression process enters the sewage tank. This completely solves the problem of secondary pollution during garbage transportation and avoids inconvenience to people.  

1.The key components are made of Imported components have the advantages of high pressure, good sealing, easy operation, and safety.

2. Product performance and characteristics

(1) The curved box greatly increases the box volume and enhances the beauty of the vehicle.
(2) The power take-off adopts a well-known domestic brand, Jiashan power take-off, specially equipped for special vehicles, perfectly matched with the engine and gearbox, and has a low failure rate
Low.
(3) The oil pump adopts a well-known domestic brand and is equipped with a compaction valve to increase the compression density and loading capacity. The loading capacity is equivalent to two and a half times that of non-compressed garbage of the same tonnage.
(4) The oil tank is enlarged and the volume is increased to prevent the high temperature of the hydraulic oil. All hydraulic oil must be added to the oil tank through a hydraulic oil filter to filter impurities in the hydraulic oil, reduce the failure rate, and effectively prevent damage to accessories. Multi-way valves are used Sino-foreign joint venture brand, Weisen Bole multi-way valve, matched with Weisen Bole cylinder, low failure rate, CAN bus control method; less wiring, low failure rate, automatic display of fault codes, convenient maintenance and repair.
(5) External oil cylinder: The skateboard oil cylinder is external, which has high efficiency, is not easy to get stuck in garbage, and is easy to maintain in the future.
(6) Operation automation: adopts dual system control of photoelectric switch and time, with one-button unloading, with wireless remote control device, all filling
Only one driver is required to operate during the discharge operation, and two operating modes, fully automatic and semi-automatic, can be set, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
(7) Dual insurance system: The operating system has dual functions of computer control and manual operation, which greatly protects and improves the utilization rate of the vehicle. The pressure regulating valve changes position to prevent customers from adjusting the pressure without authorization. The power take-off is equipped with a warning to remind customers to turn on and off the power take-off to prevent damage to the power take-off.
(8) Turning mechanism: A turning mechanism with a garbage can (or bucket) can be optionally installed.

3. Product advantages

(1) Since the compressed garbage truck has a complex upper structure and a large self-mass, reducing the self-mass of the compressed garbage truck and improving its load utilization will reduce vehicle operating costs. Therefore, high-strength materials are used to reduce the self-mass of the upper; auxiliary parts such as fenders, decorative parts, and covers can be made of injection molded parts with lower density, and components with a higher degree of integration can be used to reduce space occupation and self-mass. , and at the same time it is helpful to improve the working performance of the hydraulic system.
(2) Dedicated personnel to test run; simulate various complex working environments, the only company in China that compresses physical testing before launch.

4. Things to note

1. During operation, unrelated persons should be prevented from approaching the vehicle, especially the rear of the vehicle.
2. Garbage should be evenly put into the filling hopper, and should not be concentrated on one side, which will shift the center of gravity of the vehicle, or the garbage should be piled too high along the filling mouth, which will affect the pressure of filling the garbage and the even distribution of garbage in the garbage bin.
3. Pay attention during the filling operation. If you find large pieces of other garbage (non-domestic garbage) that cannot be compressed, you must stop the operation immediately and clear it before continuing the operation to avoid damaging the working equipment of the vehicle. It is strictly prohibited to compress construction waste.
4. When lifting and dropping the filler during unloading operations, confirm the safety of the surroundings and operate cautiously. Do not lift the filler on a slope, otherwise the center of gravity may shift backwards and cause a rollover accident.
5. The filler must not enter normal driving before it is dropped and locked.