Industry News

Routine maintenance of Isuzu garbage compression truck, After daily operation of the Isuzu garbage compression truck, rinse the body, wipe the glass and rearview mirror; rinse the inside of the garbage bin, filler and sewage tank to remove residual garbage. When washing the vehicle, do not spray water directly into electrical components and fuel tanks. On the air intake hole. Clean the sealing joint surface to ensure a good seal, and avoid damaging the rubber sealing strips and gaskets due to sharp or hard objects in the garbage.

1.Check the engine oil level and coolant level, and add if necessary. After starting the engine, listen to see if it is running normally, and check if the car's instruments, lights, service brakes, parking brakes, steering system and power take-off are normal.

2.Check the liquid level in the hydraulic oil tank. The oil level in the oil tank must not be lower than the minimum height indicated by the oil mark. If the oil is insufficient, add oil. Inspection method: The pusher cylinder and slide cylinder are in the fully retracted position, the scraper cylinder is in the fully extended position, and the loader is in the closed state.

3.Check the working device controls, electronic control buttons and sensors. If there are any problems, they should be adjusted or replaced in time.
Check the entire vehicle for oil, water, and air leaks.
Check whether the tire nut, various bolts, nuts and pins are loose; check the tire appearance and air pressure.
Troubleshoot problems that occurred on the day.

Routine maintenance of an Isuzu garbage compression truck typically includes the following tasks:

1. Daily Inspection: Before using the truck, inspect the exterior, tires, lights, mirrors, and other essential components. Check for any visible damage or leaks.

2. Engine Oil and Filter Change: Regularly change the engine oil and oil filter as per the recommended schedule. This ensures proper lubrication and prolongs the life of the engine.

3. Air Filter Replacement: Replace the air filter as per the manufacturer's recommendations. A clogged air filter can affect engine performance and fuel efficiency.

4. Fuel Filter Replacement: Replace the fuel filter to prevent contaminants from entering the fuel system. This is crucial for maintaining optimal engine performance.

5. Fluid Levels Check: Regularly check and top up fluids such as coolant, brake fluid, power steering fluid, and hydraulic fluid as needed.

6. Battery Maintenance: Check the battery terminals for corrosion, clean them if necessary, and ensure the battery is securely mounted. Test the battery and replace it if it is weak or not holding a charge.

7. Tire Inspection: Check the tire pressure, tread depth, and overall condition of the tires. Rotate the tires regularly to ensure even wear.

8. Brake Inspection: Regularly inspect the brake pads, rotors, and brake lines for wear or damage. Replace any worn components immediately to maintain optimal braking performance.

9. Lubrication: Apply lubricant to hinges, latches, and other moving parts as recommended by the manufacturer. This prevents rust and ensures smooth operation.

10. Electrical System Check: Inspect the wiring, lights, and switches to ensure proper functioning. Replace any faulty or burnt-out bulbs.

11. Body and Compactor Maintenance: Clean the garbage compactor and body to prevent debris buildup. Inspect hydraulic cylinders, seals, and hoses for leaks or damage. Lubricate moving parts as required.

12. Suspension and Steering Check: Inspect the suspension system and steering components for wear or damage. Replace any worn-out bushings, shocks, or steering components.

It is essential to follow the manufacturer's recommended maintenance schedule and consult the vehicle's manual for specific maintenance instructions. Additionally, it is highly recommended to have the truck serviced by trained technicians who specialize in Isuzu vehicles.