Isuzu rear compactor Truck Video

ISUZU NKR Refuse Compactor Truck is a compression garbage truck. When loading and shipping the trucks into 40HQ containers, it is very important to ensure proper preparation, loading techniques, proper securing, and close logistics coordination. This ensures that ISUZU NKR Trash Compactor is shipped safely, efficiently and in compliance with relevant maritime shipping requirements and restrictions.

So how to load it into a 40HQ container and ship it by sea? The following is a detailed introduction:

1. Size and weight measurement: First, the size and weight of ISUZU mini 6cbm Refuse Compactor need to be accurately measured. Including body length, height and width, as well as the total vehicle weight. These measurements are the basis for ensuring that the vehicle can safely enter the container and comply with transport requirements. For Containers, which should be 20GP: 5900x2250x2260 mm; 40GP: 12000x2250x2260 mm; 40HQ: 12000x2300x2580 mm.

2. Container selection: Select a 40HQ container suitable for loading ISUZU NKR Garbage Compactor trucks. The dimensions of the 40HQ container are approximately 12.03 meters long, 2.35 meters wide and 2.69 meters high. Make sure there is enough space inside the container to accommodate the ISUZU Compactor Trucks, leaving appropriate clearance to ensure safe loading.

3. Preparation: Before carrying out loading operations, ensure that the bottom of the container is clean, dry and free of hanging objects. At the same time, ensure that there are sufficient lifting equipment and auxiliary tools to safely load the ISUZU waste management vehicles into the container.

4. Safe loading: First, move the ISUZU NKR garbage trucks to one side of the container. The vehicle is then carefully lifted and placed within the loading area using appropriate lifting equipment, ensuring the vehicle is stable. During the loading process, care is required to ensure the structural integrity and safety of the vehicle and container.

5. Fastening and fastening points: Once loading is complete, secure the Truck Compactor inside the container using suitable fastening devices to prevent accidental movement during transportation. Ensure the vehicle is securely fastened to the container wall or floor and adheres to appropriate fastening standards and requirements.

Before shipping by sea, you also need to pay attention to the following matters:

1. Coordination arrangements: Coordinate with relevant shipping companies or logistics agents to ensure that the loaded 40HQ containers can be transported as planned and arrive at the destination. Ensure good communication with logistics, including freight times, shipping routes, costs, etc.

2. Insurance and Documentation: Ensure that both the ISUZU mini ELF Refuse Compactor and container are covered by appropriate insurance. At the same time, ensure that all necessary documents, such as cargo transportation contracts, marine insurance, packing lists, and export declaration documents, are in place.

3. Shipping requirements and restrictions: Comply with the regulations and restrictions of the shipping company to ensure that the goods can be transported smoothly. This may include information regarding dangerous goods, size and weight restrictions, and special shipping requirements.

4. Tracking and tracing: Use tracking and tracing systems or services to monitor and track goods to ensure that the goods arrive at their destination on time.